manualshive.com logo in svg

ICS Tunnel Master Jr, Руководство пользователя, Страница: 7 / 70

Поделиться
Скачать
ICS Tunnel Master Jr Скачать руководство пользователя страница 7

Tunnel Master® Jr. User Manual 

 - Page 3 

Chapter 2:  Hardware Installation

Chapter 2:  Hardware Installation

This chapter provides a brief description of the hardware components and their function and 

the tunnel settings wiring diagrams for a new Tunnel Master® Jr. installation. The following 

instructions will provide detailed information on proper relay box mounting and installation 

of the Entrance Keypad.

Planning for Installation

 

„

Before you begin, please read this entire manual.

 

„

Permanent connections must be installed by a licensed electrician and must comply in 

accordance with all local and national codes.

 

„

Wiring can be contained in rigid PVC conduit or metal conduit.

 

„

High-voltage (AC) and low-voltage (DC) must not be combined in a common conduit, 

junction box, or wire trough.

 

„

Power for the Tunnel Master® Jr. and any peripherals must come from the dedicated UPS 

as supplied by ICS.

 

„

The Tunnel Master® Jr. and peripheral equipment must be properly grounded.

 

„

Test connections in the manual override position prior to system start-up.

 

„

Before disposing boxes and cartons, look through to make certain all manuals, cables, 

connectors, and more have been removed.

WARNING: Failure to properly install the Tunnel Master® Jr. system will void the warranty 

and could result in serious injury or death.

Innovative Control Systems provides a toll-free number for customers and installers who have 

questions pertaining to the installation:

800-246-3469

Содержание Tunnel Master Jr







































































Отзывы:

Нет отзывов