F/N 51873
Feb 22
© 2022 ICS, Oregon Tool Inc.
TITLE
ICS
®
RZ60C OPERATOR’S MANUAL
17
OPERATION
• Pull the starter rope until engine starts – could be as
many as 5 to 7 pulls.
• When the engine starts, release throttle from starting
position.
• Allow engine to idle for at least one minute; squeeze
throttle trigger several times during this period.
• Press decompression valve on subsequent start ups.
AS MANY AS
15 PULLS
• Place the saw on the ground making sure the blade is
free of any obstructions.
• Place right foot on the base of the rear handle.
• Place left hand on the front handle.
• With right hand, slowly pull starter handle until the
starter pawls engage.
• Pull the starter rope (
hard, fast, short pulls
) until
engine fires – could be as many as 15 pulls on very
first start-up of saw.
• After the engine fires it will be necessary to push the
choke lever in.
• Push the decompression valve in.
5 TO 7 PULLS
4
5
6
7
Содержание RZ60C
Страница 1: ...2022 ICS Oregon Tool Inc RZ60C OPERATOR S MANUAL...
Страница 2: ......
Страница 30: ......
Страница 31: ......