ICS Nav6plus, Руководство пользователя

Страница: 82 / 90

NAV6 plus NAVTEX System User Guide
82
APPENDIX V. FREQUENTLY ASKED QUESTIONS
APPENDIX V. FREQUENTLY ASKED QUESTIONS APPENDIX V. FREQUENTLY ASKED QUESTIONS
APPENDIX V. FREQUENTLY ASKED QUESTIONS
Q. Why are the 'Station Names' missing form all message headers?
A. The text font size currently selected is ‘Medium’ or ‘Large’, station
names are only displayed when the 'Small ' font is selected.
Q. All NAVTEX messages have disappeared from view, why?
If I toggle through all the available screens using the 'Mode soft
key' only the Navigate and the Set-up screen show, why no
NAVTEX screen?
A. The 'Antenna Frequency' setting is currently set to 'NONE'.
Go to the NAVTEX options set-up page and select a receive
'Frequency'.
° If you have a NAV6 select either 490 kHz or 518 kHz
° If you have a NAV6
plus you can select either of the above or 'BOTH'
for both frequencies at the same time.
Q. How do I connect my Raymarine (Raytheon) ST40 / ST60 / ST80
instrument system to my NAV6
plus ?
A. Buy a Raymarine 'SeaTalk to NMEA bridge' from your local dealer.
This will convert the instrument data present on the SeaTalk bus into the
NMEA format that the NAV6
plus can understand. Make sure that this
unit was manufactured later than May 2002 as there are software
incompatibilities in earlier models.
Q. Is there a 24V version available?
A. An isolated 24V to 12V converter, ICS Pt No. 500.13, is available.
Q. My 12V boat has a metal hull & requires all equipment to be fully
Isolated from ground?
A. An isolated 12V to 12V converter, ICS Pt No. 500.02, is available.
Q. Is there a simple way to go to the latest message in view?
A. In NAVTEX Mode select the Sort View, change to Date Criteria and
then select Descending Order. The latest and all new message will then
appear at the top of the display.