ICS ICSW7C, Инструкция по эксплуатации, Страница: 7 / 16

IN
ST
A
LL
A
TI
O
N
11
STEP 3 — INSTALL THE CHARGER
3.1. Once the wiring on the backplate has been completed, slot
the charger onto the backplate ensuring that the stainless
steel backplate is flush with the plastic casing of the
charger.
3.2. Secure the charger to the backplate using the security
screw which was removed in step 2.1. If the unit is being
connected via a SIM card then proceed to step 3.3.
IN
ST
A
LL
A
TI
O
N
12
3.3 Remove the bottom cover by pressing the button highlighted in red
in Step 3.2, lift the bottom section of the cover towards you.
Once removed you will see a SIM card slot on the right hand side of
the charger, insert the SIM card and replace the bottom cover.
Please note: If inserting a SIM card at a later date, ensure the unit is
powered down when inserting the card
— if done live the SIM card will not
be recognised.
STEP 4 — VERIFY THE INSTALLATION
1. Verify the power cables are wired correctly.
2. Close the upstream RCD to power on the charger unit. You
should see the LED lights sequentially illuminate — if the LED
illuminates or flashes red, refer to the troubleshooting table.