![background image](http://html2.mh-extra.com/html/ics/695xl/695xl_operators-manual_3545182028.webp)
© 2015 ICS®, Blount International Inc. Specifications are subject to change
without notice. REV071315 F/N 577452
695XL OPERATOR MANUAL
28
Operation
STARTING & STOPPING THE SAW
Failure to break-in an engine may result in piston seizure.
It is very important to break-in a new engine to “seat” all moving parts, especially
the piston rings. To break-in the engine, run one full tank of 2% (50:1) fuel at idle,
cycling the throttle every 5 to 10 minutes to prevent loading.
Do not obstruct air intake
.
Loose clothing can inadvertently be drawn into air intake and obstruct air flow
which may result in engine stall.
Be sure that no part of the cutting system is contacting a solid object when
starting the saw.
When the choke and/or throttle advance is engaged for starting, the chain may
move and cause the saw to react if the chain contacts a solid object.
Move the saw at least 3 m (10 ft) from the fueling area before starting it.
Assure that secure footing is established and chain is not contacting any
objects.
When starting the saw, place the saw on clear and level ground.
IMPORTANT
CAUTION
STOPPING THE SAW
To turn the engine off, push the on/off control briefly to the right until engine stops.
Once released, control will automatically return to the “START” position. If control is
pushed beyond the detent, it will lock in the “STOP” position and prevent starting.
Close water valve completely.
WARNING