© 2015 ICS®, Blount International Inc. Specifications are subject to change
without notice. REV071315 F/N 577452
695XL OPERATOR MANUAL
26
Operation
OPERATION
Never start the saw without the bar, chain and side cover properly assembled.
DO NOT operate the saw with loose, missing, damaged or improperly
installed or repaired parts.
Check that the components shown below are intact, undamaged, and installed
correctly:
•
Side cover nut torqued down properly
•
Side cover not damaged and discharge port not plugged
•
Handles not loose, gripping area is clean and undamaged
•
Mud flap is not ripped, torn or missing and fully attached to the saw
•
Cylinder cover is properly secured in place
•
Muffler not damaged and is adequately secured to cylinder
•
Guidebar not bent or otherwise damaged such as rails dished and uneven
•
Nose sprocket not excessively worn or broken, and turns freely
•
Diamond chain does not have loose rivets, chassis damage, or missing
diamond segments
•
Chain tensioner mechanism functions properly and pin is not bent or broken
•
Drive sprocket not excessively worn and slides easily on adapter
•
Check alignment of drive sprocket and guidebar
Following are the basic instructions to assure safe operation of the saw.
WARNING
