ICS Schneider Messtechnik Snap 41, Инструкция по эксплуатации и информация о безопасности

Страница: 16 / 40

E28IB004EN-G 15
5 Putting Snap 41 into Operation
5.1 Connecting the Filling Tube
Screw in the filling tube by hand until some resistance against further turning
can be felt. Tighten with your fingers only, do not use any tools.
Fig. 3: Connecting the filling tube
5.2 Mounting the Syringe Adapter
For some applications, filling with a syringe may be more convenient. To do
so, mount the syringe adapter.
1. Remove the screw plug (see fig. 1).
2. Screw in the adapter Luer ¼" UNF by hand until some resistance against
further turning can be felt. Tighten with your fingers only, do not use any
tools.
5.3 Switching the Instrument On/Off
• To switch Snap 41 on, tap and hold the key until the display lights up.
• To switch Snap 41 off, tap and hold the key until the instrument is
switched off.
TIP:
For proper operation, cover the entire key area with your finger.
The instrument switches itself off after 5 minutes when idle and not moved.