4 Operating the Instrument
E15IB001EN-N
11
Verification of software integrity
During the startup of the instrument the integrity of
the instrument’s program code is verified by the cal-
culation and comparison of a hash value.
The hash value of your specific software version can
be found in the system information:
• Select
System Information
in the menu,
then find “Software hash”.
3.4 Performing First Checks
After installation set the instrument settings, see
section 5.
Conclude initial setup with an air check and a water
check (see section 8.1) to verify that your instrument
is in perfect condition. Your instrument has been
factory adjusted, but during transport the density
adjustment may have been compromised.
• If both checks succeed, your instrument is
ready for routine measurements.
• Else perform an air/water adjustment as
described in section 8.2.
4 Operating the Instrument
See the reference guide for a comprehensive
description of the instrument software and all
available settings and functions.
TIP:
The home button (1, fig. 1) beside the display
will always bring you back to the home screen,
which is the place where you basically start all
operations.
• Tap
Menu
to open the menu.
• Tap
to access the dashboard.
TIP:
If you do not see all functions described in this
manual, if you cannot access certain settings, or if
you cannot perform some procedures, this may be
due to restricted user permissions. See the refer-
ence guide for a description of system security and
user management.
