ICS ELECTRONICS NAV6 V3 Series, Руководство пользователя

Страница: 28 / 55

NAV6 Series NAVTEX System User Guide
28
General
The General section of the settings Menu gives access to the General Settings Page and
enables you to perform a Factory Reset.
General Settings Page
This view shows general settings for the NAV6 display
such as Date, Time, Sound, Miscellaneous settings and
the top level View controls. Use the UP and DOWN keys
to select the setting that you wish to edit. Use the

and

Softkeys 2 and 3 to change the setting.
For a NAV6plus in the View Settings section, Softkeys 2
and 3 will change to

and

and may be used to
change the order of the top level views. The Change
Softkey 4 should be used to enable or disable the view.
Note: Date and time will be taken from NMEA input data
if available. There is no battery backup so date and time
will be incorrect when power is switched on unless NMEA
data is available or the date and time are manually set.
The date and time is used to mark all incoming NAVTEX
messages so that they can be sorted by date and time.
Option Setting Notes
Year YYYY Year, e.g. 2001
Month MM Month, e.g. 03
Day DD Day, e.g. 15
Hour HH 24 hour clock
Minute mm Minutes
Keyclick OFF No beep on key press
ON Beep on key press
New Message OFF New message alert off
Alert ON Audible alarm for new messages
Antenna Alarm OFF Antenna alarm off
Timed Antenna alarms repeated 5 times, unless cancelled
Repeated Antenna alarms repeated until cancelled
SAR Alarm OFF SAR alarm off
Timed SAR alarms repeated 5 times, unless cancelled
Repeat SAR alarms repeated until cancelled