Icron USB 3.0 Spectra 3022, Руководство пользователя

Страница: 16 / 22

OPTION 2: USB Extender Direct Surface Mounting (using your own hardware)
The bottom of the Spectra 3022 enclosures features four pre-drilled holes for optional surface mounting.
Distance between the enclosure mounting holes:
42.0mm x 77. 0mm
1. Mark the center point of each of the four holes on your mounting surface either by directly measuring or
using a print out of the stencil below.
2. Hardware recommendation: M3.0 locking washers and M3.0 screws (4 of each per extender) noting
screw length will depend upon thickness of mounting surface.
3.
Drill฀through฀each฀of฀the฀four฀hole฀markings฀on฀the฀mounting฀surface฀using฀a฀4.7625mm฀(3/16”)฀drill฀bit.
4. Align the bottom enclosure holes to the newly drilled out holes on the mounting surface.
5. Place a locking washer on each of the four screws and using a screwdriver, fasten the extender into place.
To ensure the stencil below prints to scale be sure to set the page scaling setting to “none”.
15
42.0mm (1.6535'')
4.8mm (3/16'')
(4 Places)
77.0mm (3.0315'')
mounting hole
Direct Surface Mounting Measurement Stencil
note