Installation Guide
Mounting the Local Extender or Remote Extender
If mounting is required, the local and remote extenders have two mounting slots on each side for use with
cable tie/zap straps (not included).
Preparing for Installation
Before you can install the RG2211, you need to prepare your site:
1. Determine where the computer is to be located and set up the computer.
2. Determine where you want to locate the USB device(s).
3. If you are using surface cabling, the RG2211 supports a maximum distance of 100m.
OR
If you are using premise cabling, ensure Cat 5e cable is installed between the two locations, with
Cat 5e information outlets located near both the computer and the USB device(s), and the total
length, including patch cords is no more than 100m.
6
Connect the power adapter to
either
the local or remote extender.
USB 2.0 over 100m
Cat 5e cabling (or better)
mounting slot
Local Extender
Remote Extender
