ICPDAS PDS-811 Скачать руководство пользователя

Страница: 73 / 104

Programmable Device Server with I/O Expansion Slot(s)

PDS-8x1 Series User Manual, Version 1.1.2, Apr. 2015

73 -

6.3

Command List

Section

Command

Description

6.3.1

IPFILTER

Retrieves/Sets the IP addresses that are allowed to access the PDS-8x1.

6.3.2

IPCONF

Queries the network configuration. (IP/Mask/Gateway/MAC addresses).

6.3.3

SOCKET

Lists all the status of sockets (Listen/Not Used Yet) together with the
type of each socket (TCP Server: Port No./UDP/Unused).

6.3.4

COM

Queries or sets the configuration of the COM Ports (Baud Rate/Parity
/Stop Bits)

6.3.5

Broadcast

Queries or sets the Broadcast parameter, which determines whether or
not the module can receive Broadcast packets.

6.3.6

SystemTimeout

If PDS-8x1 has no network communications during the SystemTimeout
period, the PDS-8x1 will reboot it-self automatically.

6.3.7

SocketTimeout

If there is no data send/receive on the connection during the
SocketTimeout period, the PDS-8x1 will close the connection
automatically.

6.3.8

Gets/Sets the echo mode.
/M0: Transparent Mode, Multi-Echo, Data-Shared.
/M1: Slave Mode, Single-Echo, None-Shared.

6.3.9

EchoCmdNo

Queries or sets the EchoCmdNo parameter that enables or disables
adding Command Number before response.

6.3.10

EndChar

Sets a character that determines the end of a response string.

6.3.11

Queries or sets the IP address.

6.3.12

MASK

Queries or sets the subnet Mask value.

6.3.13

GATEWAY

Queries or sets the Gateway address.

6.3.14

MAC

Queries the MAC address.

6.3.15

NAME

Queries the module name.

6.3.16

ALIAS

Sets the alias for a PDS-8x1.

6.3.17

DHCP

Enables/Disables the DHCP client.

6.3.18

UDP

Sets whether to reply to a UDP search command.

6.3.19

VER

Queries the version information

6.3.20

SAVE

Determines whether or not backup copies of the "autoexec.bat" and
"vcom.ini" files are saved when using the “load” command.

6.3.21

LOAD

Loads file to the built-in flash disk on PDS-8x1. It should be used to
update firmware only.

6.3.22

CONFIG

Restores the factory default settings.

6.3.23

RESET

Reboots the PDS-8x1 module.

6.3.24

QUIT

Exits the running firmware.

Содержание PDS-811









































































































Результаты поиска

Содержание PDS-811

Отзывы:

Похожие инструкции для PDS-811

Бренды по названию

Популярные бренды

ICPDAS PDS-811, Руководство пользователя

Результаты поиска

Содержание PDS-811

Отзывы:

Похожие инструкции для PDS-811

Бренды по названию

Популярные бренды