ICPDAS PDS-811 Скачать руководство пользователя

Страница: 48 / 104

Programmable Device Server with I/O Expansion Slot(s)

PDS-8x1 Series User Manual, Version 1.1.2, Apr. 2015

48 -

Slave Timeout

In M1 (Slave Mode), the slave mode timeout setting is
use to set the waiting time after last character of the

request sent to the device. If the device does not

respond within the timeout value, the PDS-8x1

controller will return a timeout error and process next
request.

200 ms

Master ACK timeout
(MAT)

If the PDS-8x1 controller does not receive any data from

Slave for a certain period, the PDS-8x1 controller will
return an ACK character to Master and process next

request based on the configured timeout value.

(Disabled)

Save current settings
to EEPROM

If the

“SET COM PORT”

button is clicked with checking “

Save current

settings to EEPROM

” option, the new settings will be saved to the PDS-

8x1 controller only and the new settings will be valid after the next

power-on.

Apply current settings

If the “

Apply current settings

” checked when the

“SET COM PORT”

button is clicked, the new settings will be valid immediately.

SET COM PORT

Click this button to save the revised settings to the PDS-8x1 controller.

Note:

After configuring IP filter settings,

please confirm that the “Save current settings to

EEPROM” and “Apply current settings” option are
checked, and then click the “SET COM PORT” button.

Содержание PDS-811









































































































Результаты поиска

Содержание PDS-811

Отзывы:

Похожие инструкции для PDS-811

Бренды по названию

Популярные бренды

ICPDAS PDS-811, Руководство пользователя

Результаты поиска

Содержание PDS-811

Отзывы:

Похожие инструкции для PDS-811

Бренды по названию

Популярные бренды