ICPDAS IR-712A Скачать руководство пользователя страница 35

Страница: 35 / 38

IR-712A Universal IR Learning Remote Module (Ver. 1.3, Aug/23/2016) 34

When the IR learning process is finished, it is advised to save these learning data into

a file for backup by clicking Menu [File]-[Save IR Commands to File]. Besides, it is

necessary to download these learned IR commands to the IR-712A by selecting Menu

[Download]->[Download IR Commands to IR-712A].

4.4 Saving the Learned IR Commands to a File

Click Menu [File]->[Save IR commands to file] to save the learned IR commands as a

file. The extension of the file name is *.ird.

4.5 Download the IR Learning Commands to the IR-712A

After the learning IR command procedure or loading learning data from the file, it is

necessary to download these learning data to the IR-712A by clicking Menu

[Download]-> [Download IR Commands to IR-712A] in the menu and a progress

window will pop up as shown in figure 4-7.

Figure 4-7

Download the learned IR command to the IR-712A.

4.6 Test the IR commands saved in the IR-712A

The

“Test IR Commands in IR-712A” section can help users to test the learned IR

commands saved in the IR-712A as shown in figure 4-8. By clicking

“Transmit from IR-

712A

” button, the specified IR command (the prefix no. mentioned in 4.2) would be

emitted from the selected output channel of the IR-712A. You can check if the learned

IR command is correct in this way.

At the same time, the Modbus RTU command (last two bytes are CRC16 code) sent to

IR-712A is shown in the textbox underneath. This Modbus message is a reference for

users to help program the application to control IR-712A. The

“Show” button will show

the Modbus RTU message in the textbox without sending the Modbus command.

Содержание IR-712A







































Результаты поиска

Содержание IR-712A

Отзывы:

Похожие инструкции для IR-712A

Бренды по названию

Популярные бренды

ICPDAS IR-712A, Руководство пользователя

Результаты поиска

Содержание IR-712A

Отзывы:

Похожие инструкции для IR-712A

Бренды по названию

Популярные бренды