IR-712A Universal IR Learning Remote Module (Ver. 1.3, Aug/23/2016) 25
3.2.4 Test and Save Learned IR Commands
This section provides the function of enabling IR learning mode, saving IR commands
temporarily and testing the learned IR commands as shown in Figure 3-14.
Figure 3-14
Test & save learned IR commands section.
IR Learning Mode
This interface (Figure 3-15) provides
“Learn On” and “Learn Off” buttons. After clicking
the
“Learn On” button, the IR-712A would turn into IR learning mode and the TR/LN
LED is turned on to wait for the remote control
’s IR signal. The “Learn Off” can exit the
IR learning mode.
Figure 3-15
Enable/Disable IR learning mode
Test and Save Learned Commands
The functions of this section are described as follows:
Figure 3-16
Test & save IR commands section.
● “Device / Command Name” Combo Box
You can review the items in the
“Device Name” and “Command Name” combo boxes
after setting of device and IR command quantity. Users can do the IR learning
according to these items.
● IR Command Learning State
The rectangle at the right side of the
“Command Name” combo box in Fig. 3-17 shows
