ICPDAS ET-7000 Скачать руководство пользователя страница 39

Страница: 39 / 165

ET-7X00/PET-7X00 User Manual, version 1.1.2 Page: 34

3.2.1.

Network Settings

The Network Settings page allows you to perform the following functions:

(A)

Configure the network settings

(B)

Check the software information

(A)

Configuring the Network Settings

In general, network settings include the following parameters:

●

An IP address

: Each ET-7X00/PET-7X00 on the network must have a unique IP address.

●

A default gateway

: A gateway (or router) is a system that is used to connect a network

with one or more other networks.

●

A subnet mask

: The subnet mask indicates which portion of the IP address that is used to

identify the local network or subnet.

There are two methods of configuring the network settings:

●

Dynamic configuration

: The Dynamic Host Configuration Protocol (DHCP) is a network

application protocol that automatically assigns an IP address to a device.

●

Manual configuration

: In the absence of DHCP, ET-7X00/PET-7X00 modules can be

manually configured with an IP address, mask, and a gateway.

Содержание ET-7000





































































































































































Результаты поиска

Содержание ET-7000

Отзывы:

ICPDAS ET-7000, Руководство пользователя, Страница: 39 / 165

Результаты поиска

Содержание ET-7000

Отзывы: