ICPDAS ET-7000 Скачать руководство пользователя страница 14

Страница: 14 / 165

ET-7X00/PET-7X00 User Manual, version 1.1.2 Page: 9

Frame Ground

Electronic circuits are constantly vulnerable to Electrostatic Discharge (ESD), which

becomes worse in a continental climate area. The ET-7X00/PET-7X00 series features a

new design for the frame ground that provides a path for bypassing ESD, allowing

enhanced static (ESD) protection capabilities and ensuring that the module is more
reliable.

Choosing either of the following options will provide a better level of protection for
the module:

The ET-7X00/PET-7X00 has a metallic board attached to the back of the plastic case,
shown as “1” in the figure below.

When mounted to a DIN-Rail, connect the DIN-Rail to the earth ground because the
DIN-Rail is in contact with the upper frame ground, as shown as “2” in the figure
below.

Содержание ET-7000





































































































































































Результаты поиска

Содержание ET-7000

Отзывы:

ICPDAS ET-7000, Руководство пользователя, Страница: 14 / 165

Результаты поиска

Содержание ET-7000

Отзывы: