Page 3
©
ICP Group
| All rights reserved.
BASIC
SAFETY INSTRUCTIONS
Before installing or using the receiver, you must read carefully through the „Short User Manual“ as well as this manual, to
ensure that you install and use the receiver correctly.
To ensure safety you must have fully understood the manuals without leaving uncertainty prior to installation and use of
the receiver. If there still are questions and / or uncertainties after reading the manual, contact your supplier
for clarification before installing or using the receiver! The „Short User Manual“ must also be included when this device is
used by any third party. Improper operation, by NOT having read the manual and having full understanding of it as well as
how to use the receiver, can bring the operator, bystanders and other matters in danger, depending on its application, and
may cause personal injury and / or damage to personal possessions as well as to the device.
ABOUT THE SYMBOLS
Various symbols are used in this manual, the „Short User Manual“ and on the receiver itself to ensure correct installation
and usage, to prevent danger to the user and others, and to prevent property damage. The meanings of these symbols are
described below. It is important that you read these descriptions carefully and fully understand the contents.
Indicates a hazardous situation which, if not avoided, could result in property damage.
Indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.
Indicates a hazardous situation which, if not avoided, will result in death or serious injury.
SAFETY PRECAUTIONS
• DO NOT
leave packaging material lying around. This can be hazardous material for children.
• DO NOT
open and / or disassemble and / or alter the receiver to avoid electric shock, malfunction or fire. This will
also expire the warranty.
• DO NOT
put the receiver under mechanical pressure to avoid electric shock, malfunction or fire.
• DO NOT
operate the receiver in an environment with flammable gases, vapours or solvents, as this may increase the
risk of fire and explosions.
• DO NOT
use the receiver or/and any of its components (cable, plug, button ...) and/or the parts of the application the
receiver is used in, if it/they is/are damaged. In this case, discard the receiver in an environmental friendly manner.
• DO NOT
use the receiver
• if it begins to malfunction or is not functioning at all.
• if it is producing smoke or burnt smell / odor.
• if it is discoloured or has other sustainable visible damage.
• DO NOT
cover the receiver with a cloth (or similar) to avoid fire or injury by overheating.
• Make sure that the power supply is interrupted and that the cables are not crushed, kinked or damaged in any way,
for instance by sharp edges, when installing the receiver.
• Make sure the receiver is neither mechanically nor electrically overloaded. This may damage the receiver and cause
fire or electric shock.
• Only use the receiver within a range of 9 to 36 Volt dc. The load of the entire system must never exceed a maximum
total current of 10 amperes.
