Page 9
©
ICP Group
| All rights reserved.
BASIC
1.6 STATUS LED
START UP
ERROR CODE
LED flashing green rapidly.
Example: Flashing 3x red with short pause inbetween.
Green Green
Red Red
NO SMARTPHONE/TABLET CONNECTED
LED flashing green 1x with a 2 second pause inbetween.
Green
Red
SMARTPHONE/TABLET CONNECTED
LED lighting up green (permanently).
Green
SEE CHAPTER 5. TO SOLVE THE ERRORS!
Red
PAIRING MODE ACTIVE
LED flashing alternately red and green.
Green
Red
Flashing Description
3x (red) Undervoltage (<6,5V for 1,5s)
4x (red) Overvoltage (>36V for 60ms)
5x (red)
Sum of separate currents > 10A
6x (red) Overcurrent output 1
7x (red)
Overcurrent output 2
8x (red) Overcurrent output 3
9x (red) Overcurrent output 4
1.5 ACTIVATING THE PAIRING MODE
The „pairing button“ of the receiver (see chapter 1, fig. 1) is used to activate the pairing mode (pairing smartphones / tab-
lets with the receiver).
STEP 1
Make sure that the receiver is correctly wired, supplied with power and started up (see 1.4).
STEP 2
Press the pairing button on the receiver three times within 4 seconds.
Information:
The LED on the receiver
starts flashing green rapidly.
STEP 3
Wait until the LED alternates between red and green.
The pairing-mode of the receiver is now activated. Continue by pairing the receiver with your smartphone / tablet
(see 2.2) or deactivate the pairing-mode, by pressing the pairing button once more.
