background image

4

5

•  Loss and damage incurred due to non-observance of the safety 

requirements are not covered by the warranty. The manufac-
turer is not liable for consequential damage.

•  The transmitter may not be used to operate systems / applica-

tions in which the user is not protected by inherent safety func-
tions.

•  The manufacturer is not liable for damage or injuries caused by 

improper operation or noncompliance with safety provisions. In 
such cases, the warranty also expires.

•  The transmitter is not a toy and is not suitable for children.
•  Contact an expert if you have any questions about the opera-

tion, safety or setting up of the transmitter.

•  Follow the safety regulations, the relevant laws and warnings 

of the respective application / machine manufacturers (dealer, 
supplier), with which the transmitter is used.

PACKAGE CONTENTS

•  ICARUS blue TM600 (transmitter)
•  USB-C to USB-A charging cable (1.0 m)
•  Cover plate including screws for back of transmitter  
  (see “Replacing belt clip with a cover plate” section)
• Manual

TABLE OF CONTENTS

SAFETY INSTRUCTIONS FOR USE

Caution, 

danger!

Do not dispose of the 
unit in the household 

waste after the end of 

its service life.

The product was 

produced in compliance 
with the EU guidelines.

Read the manual 

before using.

GENERAL INFORMATION   

2

SAFETY REGULATIONS  

 

2

SAFETY INSTRUCTIONS FOR USE  

 

4

PACKAGE CONTENTS  

 

4

1. MANUFACTURER’S INFORMATION  

 

6

2. PRODUCT INFORMATION  

 

6

2.1  SHORT DESCRIPTION    

6

2.2 TECHNICAL DATA AND REQUIREMENTS    

7

2.3 TRANSMITTER VIEW    

8

2.4 LED STATUS    

10

2.4.1  GENERAL    

10

2.4.2 BATTERY LED    

10

2.4.3 STATUS LED    

11

2.4.4 OPTION LED LEFT    

11

2.4.5 OPTION LED RIGHT    

11

3. GENERAL NOTES ON SETTING UP AND OPERATION    

12

4. STARTUP / SETTING UP AND OPERATION    

13

4.1  CHARGING THE TRANSMITTER BATTERY    

13

4.2 COUPLING THE TRANSMITTER WITH A RECEIVER (PAIRING)     15
4.3 SWITCHING ON AND OFF    

16

4.4 CONTROL / OPERATION (DEFAULT CONFIGURATION)    

17

4.5 DELETING / REMOVING COUPLED RECEIVERS    

18

4.6 REPLACING THE BELT CLIP WITH A COVER PLATE    

19

5. ERROR CODES AND REMEDY    

20

6. MAINTENANCE AND CLEANING    

21

7. DISPOSAL    

22

8. WARRANTY    

22

9. SIMPLIFIED DECLARATION OF CONFORMITY    

23

| T

M600

EN

Содержание ICARUS blue TM600














Отзывы: