ICP ICARUS blue TM600, Руководство пользователя

Страница: 11 / 13

20 21
Flashing
sequence
Error Solution
2 x short Receiver undervoltage
(< 6.5V for > 1500ms) Check and if necessary, increase
the power supply of the receiver.
3 x short Receiver overvoltage
(> 36V for > 60ms) Check and if necessary, reduce
the power supply of the receiver.
4 x short Receive temperature
exceeded (> 85°C) Disconnect the receiver’s power
supply and leave the receiver
to cool.
1 x long,
1 x short Receiver output 1
(> 3.5A for > 1000ms) Check and reduce the current
consumption of the connected
component.
1 x long,
2 x short Receiver output 2
(> 3.5A for > 1000ms) Check and reduce the current
consumption of the connected
component.
1 x long,
3 x short Receiver output 3
(> 3.5A for > 1000ms) Check and reduce the current
consumption of the connected
component.
1 x long,
4 x short Receiver output 4
(> 3.5A for > 1000ms) Check and reduce the current
consumption of the connected
component.
1 x long,
5 x short Receiver output 5
(> 3.5A for > 1000ms) Check and reduce the current
consumption of the connected
component.
Flashing
sequence
Error Solution
1 x long,
6 x short Receiver output 6
(> 3.5A for > 1000ms) Check and reduce the current
consumption of the connected
component.
1 x long,
7 x short Receiver output 7
(> 3.5A for > 1000ms) Check and reduce the current
consumption of the connected
component.
1 x long,
8 x short Receiver output 8
(> 3.5A for > 1000ms) Check and reduce the current
consumption of the connected
component.
3 x long Permissible total current
of receiver exceeded
(> 10A for > 1000ms) Check and reduce the total
current consumption.
4 x long Critical receiver error Disconnect and reconnect the
receiver’s power supply. If the
error persists, contact the
service department.
Continuously
short Critical transmitter error Switch off transmitter and
switch back on. If the error
persists, contact the service
department.
2 x long,
1 - 6 x short Internal receiver error Disconnect and reconnect the
receiver’s power supply. If the
error persists, contact the
service department.
5. ERROR CODES AND REMEDY
In the event of system malfunctions, the error that has occurred is
indicated by a flashing sequence (see “LED status” section) of the
status LED in red. The corresponding error can be diagnosed using
the following list and (where possible) remedied.
6. MAINTENANCE AND CLEANING
The transmitter is maintenance-free for the user. Maintenance and
repairs must be carried out by a qualified technician. The transmit-
ter may only be cleaned with a damp cloth and without chemicals,
| T
M600
EN