background image

2

3

GENERAL INFORMATION

This user manual contains important / safety-related information 
for setting up and operating the ICARUS blue TM600 transmitter 
(called “the transmitter” in the following). TM600 is a B2B product 
and is thus solely intended for professional / commercial / indust-
rial applications. When purchasing the transmitter, the customer, 
owner and / or user also agrees to request the latest documenta-
tion from the manufacturer or to download it from their website.

To ensure safety at all times, you must have read and completely 
understood these instructions before setting up or operating the 
transmitter. If, after reading the manual, you have any questions 
or uncertainties, please contact your supplier before setting up or 
operating the transmitter!

This user manual must always be enclosed – including if the trans-
mitter is used by third parties.

SAFETY REGULATIONS

•  The transmitter may only be installed, maintained, repaired and 

started up by trained skilled personnel.

•  To prevent misuse or danger, never leave the transmitter unat-

tended.

•  Never open / modify / dismantle the transmitter. This could lead 

to electric shocks, malfunctions or fire.

•  Do not subject the transmitter to mechanical pressure. This 

could lead to electric shocks, malfunctions or fire.

•  Do not operate / use the transmitter in environments where 

there are flammable gases, fumes or solvents. This increases 
the risk of fire or explosion.

•  Do not use the transmitter if it is damaged. This could lead to 

damage to objects or injuries.

•  Do not use the transmitter if a malfunction occurs or if it does 

not function. This could lead to damage to objects or injuries.

•  Do not use the transmitter if smoke develops, if there is a smell 

of burning or if the transmitter discolours. This could lead to 
damage to objects or injuries.

•  Do not cover the transmitter with a cloth (or similar). This could 

lead to fire or injuries caused by overheating.

•  Do not leave the packaging materials lying around. This can be 

dangerous material for children.

•  Do not try to open the transmitter forcibly or work on it with 

pointed objects! This causes damage to the transmitter and can 
result in injuries (risk of explosion)!

•  Protect the transmitter from direct sunlight and other heat 

sources (risk of explosion)!

| T

M600

EN

Содержание ICARUS blue TM600














Отзывы: