8
Hardware Installation and User’s Guide
Getting Started
1.5.2
Product Safety Compliance
•
CE - Low Voltage Directive (73/23/EEC) (European Union)
1.5.3
Product EMC Compliance
•
FCC Part 15, Class B Emissions (USA)
1.5.4
Product Regulatory Compliance Markings
The GDT8522RZ and GDT8622RZ RAID controllers are marked with the following
regulatory markings:
1.5.5
Electromagnetic Compatibility Notices
1.5.5.1
FCC Verification Statement (USA)
Product Type: GDT8522RZ and GDT8622RZ
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different
Marking
Description
CE mark for European Union
