ICP Electronics IEI PCISA-6755-RS Series, Руководство пользователя

Страница: 43 / 56

This option specifies the latency timings(in PCI clocks) for PCI devices
installed in the PCI expansion slots. The settings are 32, 64, 96, 128,
160 , 192, 224, or 248.
Boot Screen Select
This option is select Boot Screen from CRT or LCD. Select CRT+LCD is
Boot from CRT and LCD.
LCD Panel Type
This option is select LCD Panel type.
Allocate IRQ to PCI VGA
Set this option to Yes to allocate an IRQ to the VGA device on the PCI
bus. The settings are Yes or No.
PCI Slot1 / Slot2 / Slot3 / Slot4 IRQ Priority
The option specify the IRQ priority for PCI device installed in the PCI
expansion slot. The settings are Auto, (IRQ) 3, 4, 5, 7, 9, 10, and 11, in
priority order.
DMA Channel 0 , 1 , 3 , 5 , 6 , 7
The option allow you to specify the bus type used by each DMA channel.
The settings are PnP or ISA/EISA.
IRQ3 ,4 ,5 ,7 , 9, 10, 11, 14, 15
The option specify the bus that the specified IRQ line is used on. The
option allow you to reserve IRQs for legacy ISA adapter cards. The option
determine if AMIBIOS should remove an IRQ from the pool of available
IRQs passed to devices that are configurable by the system BIOS. The
available IRQ pool is determined by reading the ESCD NVRAM. If more
IRQs must be removed from the pool, the end user can use the option to
reserve the IRQ by assigning an ISA/EISA setting to it. Onboard I/O is
configured by AMIBIOS. All IRQs used by onboard I/O are configured as
PCI/PnP.
43