ICP Electronics IEI PCISA-6755-RS Series, Руководство пользователя

Страница: 12 / 56

2.3 Unpacking Precautions
Some components on PCISA -6755’s are very sensitive to static
electric charges and can be damaged by a sudden rush of
power. To protect it from unintended damage, be sure to
follow these precautions:
Ground yourself to remove any static charge before
touching your
PCISA -6755 SBC. You can do it by using a
grounded wrist strap at all times or by frequently touching
any conducting materials that is connected to the ground.
Handle your PCISA -6755 SBC by its edges. Don’t touch IC
chips, leads or circuitry if not necessary.
Do not plug any connector or jumper while the power is
on.
2.4 Clear CMOS Setup
To clear the CMOS Setup (for example, if you have forgotten
the password, you should clear the CMOS and then re-set the
password), you have to close the J5 (2-3) for about 3 seconds,
then open it. This will put the system back to normal operation
mode.
• J2 : Clear CMOS Setup
J2 DESCRIPTION
1-2
(default)*
Keep CMOS Setup
(Normal Operation)
Short 2-3 Clear CMOS Setup
12