ZT-2060 Zigbee 6-ch DI, 4-ch Relay Output Module
- QuickStart (Jan/2018)
ICP DAS USA, Inc.
| 1-310-517-9888 | 24309 Narbonne Ave. Suite 200. Lomita, CA 90717
8
7
Communication Test
Once the ZT-2000 I/O device has joined the ZigBee network, the signal
quality can be comfirmed by monitoring the status of the ZigBee Net LED
indicators. If the LED indicator shows a steady light, communication with
the ZT-2000 I/O device has been successfully established for data
acquisition and control.
ICP DAS also provides the “DCON Utility”, which can be used to
simulate DCON/Modbus communication. This software can also be used
to verify the device settings and ZigBee I/O functions.
※
The
DCON Utility
can be dowmload from:
http://ftp.icpdas.com/pub/cd/8000cd/napdos/driver/dcon_utility/
Simulate I/O channel operating via using DCON Utility
1.
Launch DCON Utility and select the correct COM Port settings to
connect the ZigBee Coordinator (ZT-2550/ZT-2570).
2.
Clicking “Search” button will start searching which ZT-2000 I/O device
is in the same ZigBee network.
3.
If there is any ZT-2000 I/O devices displayed, double clicking the
“module name” will start the I/O channels operated platform.