ZT-2060 Zigbee 6-ch DI, 4-ch Relay Output Module
- QuickStart (Jan/2018)
ICP DAS USA, Inc.
| 1-310-517-9888 | 24309 Narbonne Ave. Suite 200. Lomita, CA 90717
11
c.
(2)
LED Indicator Status
：
LED Indicator
Status
Introduction
ZigBee Router (Slave)
Steady Lit
The Signal is Strong
Blinking (500 ms)
The Signal is Available
Blinking (1s)
The Signal is Weak
Blinking (2s)
The Signal is Unstable or There is no Available
The status of module board
Steady Lit
The Power is ON and the Module Initialization is
Correct
ZigBee PWR
Blinking (200ms)
Module Initialization Failure
(Red LED)
Watchdog is Enabled and the status of the I/O channel
Blinking (1s)
has been changed to the Safe Value. Reset the module
via the power switch or configuration commands.
Steady Unlit
The Power is OFF
The status of DI/DO channels
ZigBee DI/DO
Steady Lit
The DI/DO channel is Enabled
Steady Unlit
The DI/DO channel is Disabled