TPD/VPD Series HMI Device User Manual
Copyright © 2020 ICP DAS Co., Ltd. All Rights Reserved.
Page: 98
Step 3:
Select
“M-7000”
from the
“Device Series” drop down menu.
Step 4:
Select
“Create New…”
from the “Connection” drop down
menu to open the “New/Edit
Connection…”
dialog box.
Step 5:
In the “
New/Edit Connection…”
dialog box,
configure the connection information of the
M-7060 module in the following manner:
1. Enter a name for the connection (e.g., SER_1) in the “Connection Name” field.
2. Select
“COM1”
from the “Connection Interface” drop down menu.
3. Select the
Baud Rate of the M-7060
module (e.g., 9600) in the “Baud Rate” drop down menu.
4. Select the
Data Format of the M-7060
module (e.g., 8, None, 1) in the “Data Bit”, “Parity” and
“Stop Bit” drop down menu.
5. Click the
“OK”
button to save the configuration and close the dialog box.
