ICP DAS USA TPD-280 Скачать руководство пользователя

Страница: 28 / 107

TPD/VPD Series HMI Device User Manual

Page: 28

2.1.4

TPD-432F/433F Series Models

Models supported include TPD-432F, TPD-432F-H, TPD-433F, TPD-433F-H and TPD-433-M2.

4.3” TFT LCD with Touch Panel

Buzzer

Programmable LED Indicator

The Programmable LED is placed under the front cover of the TouchPAD device.

Reset Button

The reset button is placed under the front cover of the TouchPAD device, please remove this cover

and use a flat-head screwdriver to press this button to reset the TouchPAD device.

Note:

The reset

button does not behave as a reboot to the whole system, only resets the microcontroller and this is not enough
to make the program downloading successful. Always cut the power then turn it on before downloading
programs.

PoE and Ethernet RJ-45 Jack

(for TPD-433F/433F-H/433-M2 only)

The TouchPAD device is equipped with an RJ-45 jack that is used as the 10/100 Base-TX

Ethernet port and features networking capabilities. When an Ethernet link is detected

and an Ethernet packet is received, the

Act LED (Green)

indicator will be illuminated.

When power is supplied via PoE (Power-over-Ethernet), the

PoE LED (Orange)

indicator

will be illuminated.

Power/GND/RS-485/RS-232 Connector

The TouchPAD device is equipped with a removable terminal block connector is

designed for easy and robust wiring. For more detailed information regarding the pin

assignments, refer to

Section 2.2.2 TPD-432F Series Models

an d

Section 2.2.3 TPD-433F

Series Models

















Содержание TPD-280






































































































Результаты поиска

Содержание TPD-280

Отзывы:

Похожие инструкции для TPD-280

Бренды по названию

Популярные бренды

ICP DAS USA TPD-280, Руководство пользователя

Результаты поиска

Содержание TPD-280

Отзывы:

Похожие инструкции для TPD-280

Бренды по названию

Популярные бренды