ICP DAS USA PMC-523 Series Скачать руководство пользователя

Страница: 71 / 347

ICP DAS PMC-523x/PMC-224x/PMD Series User Manual

PMC/PMD also provide the connection ability to the ICP DAS IoTstar

Cloud Manager Software. For more detailed information, please refer to

Appendix VIII

Please Note

：

ICP DAS IoTstar Cloud Manager System only support

PMC-523x/PMC-224x/PMD controller.

Figure6-7 :

IoTstar connection setting page

Please note:

PMC/PMD adopts Google DNS server as system default DNS server,
the default IP is “8.8.8.8”, the IP can be modified to other DNS server IP

if required.

If the connection mode is “Specify an IP address”, then you make

modification to the IP address, the system will logout automatically and

re-connect to the web page automatically based on the new setting. If
the connection mode is “Obtain an IP address automatically (DHCP)”,

the system may fail to re-connect to the web page because the IP address

is changed. Please use PMC Utility to search the PMC/PMD, get the

new IP address of PMC/PMD, and then launch browser to connect to the

PMC/PMD with the new IP address.

6.3

SNMP Setting

The PMC/PMD provides SNMP(Simple Network Management Protocol)

V1 and V2c to work with the SNMP Network Management software for

monitoring the system data, power meter data and I/O module data. The

SNMP Setting page allows you to enable or modify the settings of the

SNMP function on the PMC/PMD. The following figure illustrates the set

up interface:

Содержание PMC-523 Series




























































































































































































































































































































































Результаты поиска

Содержание PMC-523 Series

Отзывы:

Похожие инструкции для PMC-523 Series

Бренды по названию

Популярные бренды

ICP DAS USA PMC-523 Series, Руководство пользователя

Результаты поиска

Содержание PMC-523 Series

Отзывы:

Похожие инструкции для PMC-523 Series

Бренды по названию

Популярные бренды