![background image](http://html2.mh-extra.com/html/icp-das-usa/piso-813/piso-813_quick-start-manual_3759120004.webp)
PISO-813/PISO-813U Quick Start Guide
ICP DAS CO., LED
4
WebSite: http:// www.icpdas.com.tw E-Mail: [email protected] , [email protected]
Setting Reference: (*)
Default Setting
Analog Input Range
JP2 (Polarity Select)
JP1 (Range Select)
-10 V ~ +10 V (*)
Bipolar
20 V
-5 V ~ +5 V
Bipolar
20 V, 10 V
-2.5V ~ +2.5 V
Bipolar
20 V, 10 V
-1.25 V ~ +1.25 V
Bipolar
20 V, 10 V
-0.625 V ~ +0.625 V
Bipolar
20 V, 10 V
0 ~ 10 V
Unipolar
10 V
0 ~ 5 V
Unipolar
10 V
0 ~ 2.5 V
Unipolar
10 V
0 ~ 1.25 V
Unipolar
10 V
0 ~ 0.625 V
Unipolar
10 V
For more detailed jumper and SW1 information, please refer to manual Sec.
2.2 A/D Converter Operation and Sec. 2.3 Card ID Switch.
(
CD:\NAPDOS\PCI\PISO-813\manual\)
Step 1:
Shut down and power off your computer.
Step 2: Remove the cover from the computer.
Step 3: Select an unused PCI slot.
Step 4: Carefully insert your I/O card into the PCI slot.
Step 5: Replace the PC cover.
Step 6: Power on the computer.
After powering-on the computer, please finish the Plug&Play steps according
to the prompted messages.
Installing Hardware on PC