ICP DAS USA PDS-700 Series, Руководство пользователя

Страница: 74 / 191

PDS Series User Manual ( V1.4, Oct. 2009) ----- 74
4. Setting up the PDS module
Step 1: Connect the PDS module to the Ethernet Network
Before connecting the PDS module to an Ethernet network, the following items are
needed:
1. Power Supply
：
10 ~ 30 V
DC
(for PDS(M)-700)
12 ~ 48 V
DC
(for PPDS(M)-700-MTCP, DS-700, PPDS-700-IP67, PDS-782-
25)
(eg
：
DP-665: http://www.icpdas.com/products/Accessories/power_supply/power_list.htm )
2. Hub (eg
：
NS-205 http://www.icpdas.com/products/Switch/industrial/industrial_list.htm )
3. The network settings in the PC are correctly configured and the Ethernet connection is
functioning normally.
4. Disable or correctly configure the Windows firewall and any Anti-Virus software
firewall first or else the “Search Servers” function in the VxComm Utility may not work.
(Contact your System Administrator for more details of how to do this.)
5. Connect the PDS
series module to the Ethernet as shown on the following page and
switch on the power.
6. Make sure the indicator LED is flashing.
If your PDS series module is a D-version module, the 5-digit 7-SEG LED will be used
to indicate the system information described in Sec. 3.7
7. Install VxComm Utility on your PC
The software is located at
：
CD: \NAPDOS\ Driver\VxComm_Driver
http://ftp.icpdas.com/pub/cd/8000cd/napdos/driver/vxcomm_driver/