ICP DAS USA MDC-211-ZT Скачать руководство пользователя страница 6 | Manualshive

Страница: 6 / 46

ICP DAS USA MDC-211-ZT Скачать руководство пользователя страница 6

ICP DAS, MDC-211-ZT user manual , v1.0 Page 5

Copyright © 2018 by ICP DAS. All rights are reserved.



Support Parameter Setting via CSV File

CSV (Comma

‐

Separated Values)

is a text file format that can be edited in spreadsheet

software or plain text files and has the advantage of being easy to use, read and maintain.

MDC-211-ZT parameter setting includes the Modbus TCP communication ID and port

number, the Serial port communication parameters and the Modbus RTU commands that

settings can also be edited in a *.csv file and import into the MDC-211-ZT from the Web UI,

and then start to monitor the data of the remote Modbus RTU devices.



Support ZigBee Communication Protocol

ZT series module of ICP DAS includes a variety of ZigBee to Modbus Digital/Analog I/O

modules, and also provides many ZigBee to RS-232/RS-485/Ethernet converter that can

upgrade the normal Modbus devices to ZigBee wireless devices.

The advantages of ICP DAS's ZT series products are its ZigBee low cost, low power

consumption features, FCC ID certification, and wireless communication capabilities up to

700 meters (Line of Sign, LOS) standard transmission distance, plus the dynamics mesh

network that allows users to easily monitor Modbus device information in environments

where cabling is not easy.

«
...
4
5
6
7
8
...
»

Содержание MDC-211-ZT















































Отзывы:

Нет отзывов