M2M-711D Quick Start (Version 2.20 Mar/2012)
PAGE: 16
4.
Communication Test
VxServer Mode Communication Test
Step1: Connect M2M-711D with PC as shown below:
Step2: Assign the M2M-711D’s Server Port1 to PC’s virtual Com 13. Please
refer to section 4.5.
Step3: Connect VxServer with M2M-711D: In the Standard Config setting
web of M2M-711D, users have to set Server IP (For example, the IP in the
above diagram is 192.168.1.219) and click “Save Setting” to finish
connection.
Step4: Use Send232 Program to test communication. (Download link:
http://ftp.icpdas.com/pub/cd/8000cd/napdos/7188e/tcp/pcdiag/source/send23
2.vb6_2.0.1
) Open two Send232 programs, one use Com1 (connect with
M2M-711D), the other use Com12 (produced by VxComm driver). Press the
Send button respectively and you can see the two Send232 programs send the
data with each other. As shown below:
