![background image](http://html2.mh-extra.com/html/icp-das-usa/m-7026/m-7026_user-manual_3573567075.webp)
M-7026
M-7026 User Manual Rev: 1.5 Date: 2016/03/10
75
2.28 $AAEnn
Description:
This command is used to specify whether the counter edges for each Digital
Input channel of a specified module are to be rising or falling.
Syntax:
$AAEnn[CHKSUM](CR)
$
Delimiter character
AA
The address of the module to be set in hexadecimal format (00 to FF)
E
The command to set the counter edges for the Digital Input channels
nn
A two-digit hexadecimal value representing the Digital Input channel,
where bit 0 corresponds to channel 0, and bit 1 corresponds to
channel 1, etc. When the bit is 0, it denotes that the counter edge for
the channel will be set to falling, and 1 denotes that the counter edge
for the channel will be set to rising.
Response:
Valid Command:
!AA[CHKSUM](CR)
Invalid Command:
?AA[CHKSUM](CR)
!
Delimiter character to indicate a valid command
?
Delimiter character to indicate an invalid command
AA
The address of the responding module in hexadecimal format (00 to
FF)
There will be no response if the command syntax is incorrect, there is a
communication error, or there is no module with the specified address.
Examples:
Command: $01E3A
Response: !01
Sets the counter edges for Digital Input channels 0, 1, 3, 4 and 5 of
module 01 to rising, and the counter edges for all other Digital Input
channels to falling. The module returns a response indicating that the
command was successful.
Command: $01E
Response: !013A
Reads the status of the counter edges for all Digital Input channels on
module 01 and returns a response indicating that the command was
successful, with a value of 3A, which denotes that the counter edges for
Digital Input channels 0, 1, 3, 4 and 5 are rising and the counter edges for
all other Digital Input channels are falling.
Related Commands:
Section 2.27 $AAE
Содержание M-7026
