M-7026
M-7026 User Manual Rev: 1.5 Date: 2016/03/10
174
0: 2’s Complement Hexadecimal
1: Engineering Units
00270
Reads the status of the Host Watchdog timeout.
Write 1 to clear.
R/W
00271
Reads/sets the Analog Input Filter Format
0: Normal
1: Fast
R/W
00272
Loads the factory calibration parameters. Write 1 to
load.
W
00273
Reads the Reset status
0: This is
NOT
the first time the module has been
read since being powered on
1: This is the first time the module has been read
since being powered on
R
00280
Clears the high latch values for all Analog Input
channels. Write 1 to clear.
W
00281
Clears the low latch values for all Analog Input
channels. Write 1 to clear.
W
00284
Enables or disables calibration, or reads the status
of the calibration function
0: Disabled
1: Enabled
R/W
00285
Sets the Analog Input zero calibration. Write 1 to
set.
W
00286
Sets the Analog Input span calibration. Write 1 to
set.
W
00289 ~
00294
Reads/clears the status of the low alarm for
channels 0 to 5. Write 1 to clear.
R/W
00305 ~
00310
Reads/clears the status of the high alarm for
channels 0 to 5. Write 1 to clear.
R/W
00321 ~
00326
Enables or disables the Analog Input Alarm, or
reads the status of the Analog Input Alarm
0: Disabled
1: Enabled
R/W
00337 ~
00342
Reads/sets the Analog Input Alarm mode
0: Momentary
1: Latched
R/W
00385 ~
Clears the high latched Analog Input for channels 0
W
Содержание M-7026
