ICP DAS USA LC-101H, Руководство пользователя

Страница: 35 / 35

LC-101H/LC-102H User Manual
-
35 -
~AAEV Enable/disable module calibration, V is 0 to disable and 1
to enable.
~AARD read response delay time in ms in hex format
~AARDVV set response delay time in ms, VV in hex format, 00 - 1E
Baud Rate Settings (CC)
Code 03 04 05 06 07 08 09 0A
Baud Rate 1200 2400 4800 9600 19200 38400 57600 115200
Data Format Settings (FF)
7 6 5 4 3 2 1 0
CU CS Reserved
Key Description
CS Checksum Settings
0: Disabled
1: Enabled
CU Counter Update:
0: The counter is updated when there is a falling edge in the input signal.
1: The counter is updated when
there is a rising edge in the input signal.
Note : All Reserved bits should be zero.
DIP Switch setting
1 Protocol ON: DCON, OFF: Modbus RTU
2 Configuration ON: by software, OFF: by hardware
3 Address
ON: added by 16, OFF: added by 0
4 INIT mode ON: INIT, OFF: Normal
Base address: 32 (0x20)