ICP DAS USA ICP CON GW-7557, Руководство пользователя

Страница: 69 / 79

Figure 67 “About” window
5.3 Establish connection with GW-7557
The connection of Utility and GW-7557 is shown in
Figure 68
. Please follow the
steps to establish connection.
Step 1:
Wire COM Port of PC to RS-232 port of GW-7557.
Step 2:
Connect PROFIBUS cable between PROFIBUS Master station and GW-
7557 and enter data exchange mode (please refer step 1~7 of section 4.9
for detail). The RUN LED of GW-7557 is going to light at this time.
Figure 68 The connection of Utility and GW-7557
Step 3:
Set COM Port communication settings of utility the same as COM Port
settings of GW-7557 or turn the switch on the back of the GW-7557 to
use default settings (please refer section 2.6).
GW-7557 PROFIBUS/HART Gateway User Manual
(Version 1.00, Dec/2011)
PAGE: 69