ICP DAS USA ICP CON GW-7557, Руководство пользователя

Страница: 50 / 79

Figure 42 Set module parameters of Command 1
、
Command 108
、
Command 109 module
(2) Enable Burst mode
Click Monitor/Modify Variables in main windows to establish variable
table 1 and fill in address of PROFIBUS output area. Input “1” at PQB0
、
input “3” at PQB2(module address of Command 108 module), and input
“1 (command 1)” at PQB6 , then click
button to send command 108 to
HART slave device for write burst mode command number. After send
command 108, input “2” at PQB0
、
input ”4” at PQB2 (module address of
Command 109 module), and input “1” at PQB7, then click button to
send command 109 to HART slave device for enable burst mode (Please
refer to section 4.6.2), as shown in
Figure 43
、
Figure 44
and
Figure 45
.
GW-7557 PROFIBUS/HART Gateway User Manual
(Version 1.00, Dec/2011)
PAGE: 50