iCAM-
721F User’s Manual ICP DAS
61
4.4.1 Motion Tab
From the
Motion
tabbed pane, you can define specific target areas within the
scope of surveillance to focus the motion detection function.
Set up the motion detection area:
1) Enable the
Enable Motion Detection
check box.
2) Click
Add
button and a default
Region01
frame will pop-up on the screen.
3) Click and hold the mouse inside the frame to drag it to the location where you
want to focus detection. Resize the frame by dragging its corners or borders.
4) Click the
Save
button to apply.
5) Repeat above steps to add more motion detections. The maximum number of
motion detections is 10.
NOTE
Total defined motion detection areas cannot exceed
10
regions.
1. Check
“
Enable Motion Detection
”
.
3. Define the motion detection size &range.
2. Click
Add
button
4. Click
Save
button
