iCAM-
721F User’s Manual ICP DAS
68
4.4.3 Snapshot Tab
The
Snapshot
tabbed pane sets the Camera to take snapshot images when event
is triggered.
The methods available for selection:
1. Always
2. Schedule
3. Motion
4. GPIO Input
The settings after event trigger:
1. Time Lapse: the duration (in seconds) to detect the motion again.
2. Single snapshot or 6 snapshots
3. Target: the methods and destination to store the snapshot files.
Always:
Under this method, the Camera automatically continuous to capture
snapshots of the area under surveillance at every 1, 2 or 3 seconds
interval (Time Lapse).
Target:
The stream of accumulated snapshots may be stored in the
SD Card, sent to host by E-mail or FTP, or through all of them.
