ICP DAS USA I-7565M-HS, Руководство пользователя

Страница: 37 / 85

I-7565M-HS USB to CAN converter User Manual (version 1.0.0) Page: 37
Copyright © 2018 ICP DAS Co., Ltd. All Rights Reserved. E-mail: service@icpdas.com
in the assigned CAN port
15 CANHS_GetCANBlackListCANID
Get the firmware CAN blacklist ID filter value
in the assigned CAN port
16 CANHS_GetCANStatus
Get the CAN Bus status in the assigned CAN
port
“Communication” Function Table
No. Function Name Description
1 CANHS_SetCANTxMsg
Send a CAN message to the software
transmitted buffer of the assigned CAN port
2 CANHS_GetCANRxMsg
Get a CAN message from the software
received buffer of the assigned CAN port
3 CANHS_SetCANHWSendMode
Enable/disable the hardware cyclic sending
CAN message mode in the assigned CAN
port.
4 CANHS_GetCANHWSendMode
Get the hardware cyclic sending CAN
message mode in the assigned CAN port
5 CANHS_SetCANHWSendMsg
Set the hardware cyclic sending CAN
message content in the assigned CAN port.
6 CANHS_GetCANRxFramePerSec
Get the CAN Bus data flow in the assigned
CAN port
“Software Buffer” Function Table
No. Function Name Description
1 CANHS_GetCANRxMsgCount
Get the received CAN message counts in
the software buffer of the assigned CAN port
2 CANHS_ClearCANRxBuf
Clear the CAN message in the software
received buffer of the assigned CAN port
3 CANHS_ClearCANTxBuf
Clear the CAN message in the software
transmitted buffer of the assigned CAN port
“Other” Function Table
No. Function Name Description
1 CANHS_GetDllVersion Get the API library version.
2 CANHS_GetFwVer Get the firmware version of the module
3 CANHS_GetModuleStatus Get the hardware status of the module
4 CANHS_ResetModule Reset module