I-7565 USB/CAN Converter Quick Start User Guide (Version 1.0, March/2007) ------ 5
4. Testing the I-7565s by using the I-7565 Utility
Step1: Set the Init/Normal switches on the back of the I-7565 A and I-
7565 B to the “Normal” position. Then, turn on the DC power. The
ON LED of the I-7565 A and B will always be turned on. It means
these two I-7565 converters are working in the operation mode.
Step2: Run the I-7565 Utility, I7565.exe, two times. Then duplicate I-7565
windows will be displayed on the screen. One is named as Utility A
and the other is called Utility B.
Step3: Select the “Test” tab and click the “Connect” icon on the tool bar of
Utility A and Utility B to configure the USB Port1 and the USB
Port2 on the PC. The COM1 and COM2 ports on the PC will be
used for connecting with the I-7565 A and B converters,
respectively.
Step4: After selecting the necessary Com port and baud rate, click the
“Ok” button on Utility A and B, respectively. Then, Utility A is
shown in the below figure and Utility B will be similar to Utility A.
Step5: Check the “Use CAN Message” checkbox and input the value to
the “CAN Message” frame on Utility A. Click the “Send” button.
Then, the Utility will automatically transfer these CAN messages to