I-7530A RS-232/485/422 to CAN Converter User’s Manual (Version 1.2, Sep/2011) ------------- 24
Application 3:
This application may be used to construct a RS-232 device network
via CAN bus. The architecture is shown below.
Configurations:
In order to apply this application, user need to configure the I-7530A#1,
I-7530A#2, and I-7530A#3 as follows. The RS-232 configurations of these
three I-7530As are decided by the RS-232 device they connect with.
I-7530A#3
I-7530A#2
I-7530A#1
Communication Descriptions:
When Device1 want to transmit RS-232 commands “1234567” to
Device2, the commands written to I-7530A#1 by Device1 need to be
“0021234567” because the Device1 is set to dynamic Tx CAN ID (Fixed
Tx CAN ID is not checked). The first three bytes of “0021234567” is “002”,
