I-7188XBD-CAN I-7188 CAN bus series PAC - QuickStart (Feb/2017)
ICP DAS USA, Inc.
|
www.icpdas-usa.com
| 1-310-517-9888 | 24309 Narbonne Ave. Suite 200. Lomita, CA 90717
2
2. Terminal Resistor Jumper Selection
Remove the cover of the I-7188XBD-
CAN/μPAC
-7186EXD-CAN. Users can see the
part of internal structure shown as following figure. The XC100 provides users one
jumper-selected termination resistor (J3). Its position is displayed below.
The jumper J3 is used to judge the resister of CAN network. When users want to set the
jumper JP3, the upper cover of I-7188XBD-
CAN/ μPAC
-7186EXD-CAN needs to be
removed. About the J3 jumper setting, please refer the following figure
