GW-7228 Quick Start v1.2 2011/05
4
4
4
4/
/
/
/8
8
8
8
Step4: Power wire connection
Connect the power supply to the GW-7228 module’s power terminal connecter,
please see the following connection as Figure 5.
Figure 5: Power Wire Connection
GW-7228 Utility Configuration
Modbus Network Configuration
The GW-7228 and the controller must be set the same serial communication
parameters of the Modbus network configuration. The Modbus network
configuration screen from GW-7228 is shown as Figure 6.
Figure 6: Modbus configuration screen
J1939 Network Configuration
The device NAME should be set according to the application and the vendor
where the module is being used based on the J1939 network specification.
The J1939 network configuration screen from the GW-7228 is shown as
Figure 7.
Figure 7: Modbus configuration screen
