![background image](http://html1.mh-extra.com/html/icp-das-usa/alm-04-mrtu/alm-04-mrtu_user-manual_3560286015.webp)
ALM-04-MRTU User’s Manual
ALM-04-MRTU
User’s Manual (Rev1.0, Jan./2020) ------------- 15
3.2
Start your Edit
First, load your project if the “
Project Dir:
” is not your target work job, or you need
to start with a new project.
To Create a new project, use
Load Project
button, select the directory where you
want to put and add the new directory name “
newwork1
”, etc. show as below.
Figure 3-3
:
New a Project in Editor.
Then, Follow the step number,
(1)
Set Modbus RTU Config & Volume:
For default,
Volume level is
6
, range from 0(Mute)~10(Max).
For Modbus RTU Device ID is
1
.
For RS-485
(115200,N,8,1)
Baud Rate:
115200
Parity:
None
Data bit always be
8
Stop bit:
1
Modify those item for your system request.