manualshive.com logo in svg

ICP DAS USA A-812PG, Руководство пользователя по оборудованию, Страница: 34 / 37

Поделиться
Скачать
ICP DAS USA A-812PG Скачать руководство пользователя страница 34

Daughter Board 

 

The A-812PG can be connected with many different daughter boards. The functions of these 

daughter boards are described as follows. 

 

 

2.10.1    DN-20 for Analog input / output   

 

The DN-20 is a

 general-purpose 20

-pin connector. This board can be connected to a 

20pin connector. It is suitable for easy signal connection and measurement. 

 

2.10.2   DB-16P for Digital input 

 

The DB-16P (or 782 series) is a 

16-channel isolated digital input

 board. The A-812PG 

provides 16-channel non-isolated TTL compatible digital inputs from CN4. If connecting to 

DB-16P, the A-812PG can provide 16 channels isolated digital input signals. Isolation can 

protect PC if abnormal input signal is occurred. 

 

 

2.10.3    DB-16R for Digital output 

 

The DB-16R (or 785 series) provides 

16-channel SPDT relay output.

 The A-812PG 

provides 16 channels TTL compatible digital output from CN5. If connecting to DB-16R, the 

A-812PG can provide 16 channels relay output to control power device. 

 

                A-812PG Hardware Manual (Ver.1.2, Sep/2005, IPH-004-12)   -----  

34

 

Содержание A-812PG






































Отзывы:

Нет отзывов