Icos MVS6000, Системное руководство, Страница: 25 / 94

Hardware
MVS6000 System Level Manual/1.0/Dec-2001 2-13
2.3.1.2 Breakout Boxes and Cables
Breakout Boxes
To connect two or more SR cameras to an MVS board, a breakout box must be used. A breakout
box has a SubD15 connector In and two or three Hirose connectors Out.
For the Hirose connector of the STxx Sony cameras and the Teli camera, a new connector
standard (EIAJ standard) has been introduced in which Pin 11 is no longer used as 12V input but
as trigger input. See the following table for more details.
Hirose connector Pin Nr Old Pin Layout New EIAJ standard
1 GND GND
2 + 12 V DC + 12 V DC
3 Video Out (GND) Video Out (GND)
4 Video Out (signal) Video Out (signal)
5 HD in (GND) HD in (GND)
6 HD in (Signal) HD in (Signal)
7 VD in (Signal) VD in (Signal)
8 TRIG in (GND) GND
9 Trig In (Signal) /
10 GND WEN output (Signal)
11 + 12 V DC Trig In (Signal)
12 VD in (GND) VD in (GND)
Warning: New cables must be used for the connector with the new EIAJ standard.
The problem is that the connectors are physically “compatible”, but if you use old
cables with the new connectors or the new cables with the old connectors, either the
camera or the MVS board will be seriously damaged.
To avoid confusion:
· The cameras with the new EIAJ standard connector will get a blue label.
·
The breakout boxes compatible with the old camera connectors are gray.
The breakout boxes with the new EIAJ standard Hirose connectors have a blue
label or a blue housing.
An example of a blue label for a breakout box:
ICOS Vision Systems
MVS 966R
Product of BELGIUM
REV : 0/0/0
New EIAJ Standard
ICOS Vision Systems
MVS 966L
Product of BELGIUM
REV : 0/0/0
New EIAJ Standard
·
The cables will get a blue label.