Icop VDX-6318 Скачать руководство пользователя страница 82 | Manualshive

Страница: 82 / 114

Icop VDX-6318 Скачать руководство пользователя страница 82

VDX-6318 Windows Embedded Compact 7 - Getting Started Guide

Windows Embedded Compact 7 Getting Started Rev 2.00

Page 82

Appendix D –

VDX-6318-MSJK Technical Information

Features

Fan-less Design

800 MHz Vortex86DX SoC

XGI Z9s video with VGA and LCD
support

256MB DDR2 RAM

4MB SPI Flash

10/100Mbps LAN

UltraDMA-100/66/33 IDE

CM119 Audio

2 USB 2.0 host interfaces

3 RS-232 serial ports

1 RS-232/422/485 serial port

32-bit GPIO

The VDX-6318 Single-Board-Computer (SBC) is an industrial SBC, designed with low-power consumption
to operate without fan using passive cooling, and able to operate in harsh temperature range from -20°C
to +70°C. Industrial grade version, able to operate from -40°C to +85°C, is available by special order.

Designed  with  the  ultra-low  power  800  MHz  Vortex86DX  System-On-Chip  with  integrated  I/O
peripherals and soldered on 256MB DDR2 RAM provides sufficient system memory to support Windows
Embedded Compact 7, Windows XP Embedded and WEPOS.  The integrated 10/100Mbps Ethernet, two
USB 2.0 host interfaces, 4 serial ports, parallel port, GPIO and PC/104 interface provide connectivity to
broad range of external devices and systems with endless application possibility.

The VDX-6318 SBC supports multiple boot options and able to boot from the following resources:



IDE storage device (including IDE flash and hard disk)



USB floppy



USB storage



USB CD/DVD-ROM



Onboard SPI flash



Boot from Network via PXE

Board-Support-Package is available to support Windows Embedded CE 5.0, 6.0 and Windows Embedded
Compact 7. Device drivers are available to support Windows XP, Windows XP Embedded and WEPOS.

Designed with the matured x86 CPU architecture with rich set of integrated I/O and able to operate in
harsh environment, the VDX-6318 SBC is the suitable for broad range of application, such as industrial-
automation, process-control, robotics, instrumentation, human-machine-interface, medical device,
automotive, utility metering, network appliance, security access control, thin client, intelligent RFID
reader, home-building automation, point-of-sales, information kiosk and other embedded devices.

By integrating key peripherals into a product quality design, along with the support for the Windows
Embedded technologies, the VDX-6318 hardware platform can help developer minimize development
risk, significantly lower development cost and gain critical Time-to-Market advantage.

«
...
80
81
82
83
84
...
»

Содержание VDX-6318



















































































































Отзывы:

Нет отзывов